Pressure Vessels
Horizontal vessels.
Saddle-supported pressure vessels for process, receiver and storage duty — designed to ASME Sec VIII Div-1 and fabricated start to finish in Nashik.
Request a Quote → See specificationsDesign codeASME Sec VIII Div-1
Max diameter3,000 mm
Max length20,000 mm
Plate thicknessUp to 14 mm
Overview
Horizontal, built to code.
Horizontal vessels are our most-built configuration. Shells are rolled in-house, dish ends formed on site, and every nozzle, saddle and manway is fitted and welded under one roof, with full material traceability.
- Carbon steel (SA 516 Gr. 70), stainless and high-alloy construction
- Saddle supports, nozzles, manways and internals to your drawing
- Shells rolled and dish ends formed in-house
- Welding per ASME Sec IX qualifications
- Hydrostatic test and NDT before dispatch
ChemicalPetrochemicalPharmaPower
Specifications
Typical scope.
Final design is set per project from your data sheet or drawing. Share your requirement and we revert within 24 hours.
| Design code | ASME Sec VIII Div-1 |
|---|---|
| Diameter | Up to 3,000 mm |
| Length | Up to 20,000 mm |
| Plate thickness | Up to 14 mm rolled in-house |
| Materials | CS (SA 516 Gr. 70) · SS 304/316/316L · high-alloy |
| Weight handled | Up to 13 T single piece |
| Testing | Hydrostatic · DPT · UT · radiography liaison |
| Certification | ASME 'U' stamp: target 2026 |
From our floor
Horizontal Vessels, made here.
Related
Also in Pressure Vessels.
Let's build together
Need a horizontal vessel?
Send diameter, length, design pressure and material. An engineer will reply within 24 hours.